PenTest/nmap
1
0
Fork 0
mirror of https://github.com/nmap/nmap.git synced 2025-12-09 06:01:28 +00:00
Code Issues Projects Releases Wiki Activity
Files
06e2ac1ba9f9963b64397c692772c7ba869dc9b9
nmap/docs/TODO
fyodor 714dd18f7f even more TODO updates -- prioritization
2009-11-17 23:54:28 +00:00

2026 lines
100 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
TODO $Id: TODO 11866 2009-01-24 23:10:05Z fyodor $ -*-text-*-
==Must do before next release==
o We should package the rendered Nroff man page translations (e.g. all
16 languages) in the tarball to make it easier for distributors to
package them. For example, see
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=358336. Including
the translations would add 2.5MB to the (currently 28MB)
uncompressed tarball and about 800KB to the (currently 9MB) bz2
compressed tarball. [Fyodor]
o The Nmap 5.00 tarball contains:
-rw-r--r-- fyodor/fyodor 122943 2009-06-24 14:35 nmap-5.00/docs/scripting.xml
-rw-r--r-- fyodor/fyodor 151 2009-06-24 14:35 nmap-5.00/docs/nmap-usage.xml
-rw-r--r-- fyodor/fyodor 604 2009-06-24 14:35 nmap-5.00/docs/nmap-man-enclosure.xml
-rw-r--r-- fyodor/fyodor 76918 2009-06-24 14:35 nmap-5.00/docs/nmap-install.xml
-rw-r--r-- fyodor/fyodor 10179 2009-06-24 14:35 nmap-5.00/docs/legal-notices.xml
If we're going to include the XML source files, we should include
refguide too. But rather than add that, we should probably take
these out. After all, people can easily grab them from svn or our
new http svn gateway if desired. So no need to bloat the tarball
with these files which aren't installed. [We're going to take the
XML source files out of the tarball] [Fyodor]
o Ndiff man page should be built from XML source whenever a release is
done, as ncat/zenmap/nmap man pages are. [Fyodor]
==Try to do before next release==
o Many people may have stale (since removed/renamed) scripts in their
Nmap scripts directory because our 'make install' does not remove
them and so they remain and can cause problems (like running twice
after being renamed). We should probably add a line to our 'make
install' which removes the scripts/lib names we have previously
used. We're doing this rather than blowing away the old directory
just in case someone has custom scripts/libs there (though that is
still a bad idea). [David]
o Fix assertion failure with certain --exclude arguments (see
http://seclists.org/nmap-dev/2009/q4/276). [David]
o Update the CHANGELOG for new (5.05BETA1 or whatever) BETA
release. [Fyodor]
o Make the new Nmap beta release (5.05BETA1 or whatever)
o Look into reducing Nmap memory consumption
o UDP scans with -p- and large hostgroups are a particularly large
offender. See if there is a way to prevent them from eating up
gigs of RAM. See the message "Port memory bloat" at
http://seclists.org/nmap-dev/2009/q3/0926.html for a patch that
reduces Port memory use by about 50%.
o One idea David has been considering is a way to represent filtered
ports (or whatever the default state is) without creating a Port
object for each one.
[David]
o [NSE] Document Patrick's worker thread patch in scripting.xml (see
http://seclists.org/nmap-dev/2009/q4/294,
http://nmap.org/nsedoc/lib/stdnse.html#new_thread,
http://nmap.org/nsedoc/lib/nmap.html#condvar) [Patrick]
o [NSE] Patrick's script dependency patch:
http://seclists.org/nmap-dev/2009/q4/295
o I'm not sure if he has gone through and actually set appropriate
dependencies (and removed runlevels) yet
o Integrate latest version detection submissions and corrections.
This was last done based on submissions until February 9, 2009.
o Make the nmap.header.tmpl wording a little more generic so it more
clearly applies to Ncat, Zenmap, Nping, etc. Then use
templatereplace.pl to apply those changes to the code. [Fyodor]
o [NSE] We should do a favicon survey like the one Brandon did for
/favicon.ico files but which uses the favicons specified by the HTML
files rather than just that exact location. For example, insecure.org
sites include in the headers:
<link REL="SHORTCUT ICON" HREF="http://images.insecure.org/images/tiny-eyeicon.png" TYPE="image/png">
Then we should update our favicon database to include the top ones,
and we should also improve our favicon script so that it either
omits checking /favicon.ico if the HTML-specified one exists, or it
should just download, interpret, and display info for both (right
now it seems to give prority to the wrong one: /favicon.ico).
o Move Zenmap man page from nmap/docs/ to nmap/zenmap/docs to match
the man page location for ncat and ndiff.
o Don't break packaging/build system
o Don't break the system for posting html to web site.
o Consider standardizing names for nping and ncrack man pages as well.
[Fyodor]
o Update "History and Future of Nmap"
(http://nmap.org/book/history-future.html) to include all the news
since September 2008. [Fyodor]
o [Ncat] Add SSL support for --exec so you can use SSL to talk to your
remote shell, etc. See this thread:
http://seclists.org/nmap-dev/2009/q4/255, particularly the
implementation sketch at http://seclists.org/nmap-dev/2009/q4/268 [Venkat,David]
o [Ncat] Test, review, and (if appropriate) merge Venkat's HTTP Digest
proxy authentication patch. See
http://seclists.org/nmap-dev/2009/q3/773. [David]
o Web site HTML improvements
- Maybe start with nmap.org.
- Find and fix HTML validation problems, bad links. I'm not sure
what tool is best for this.
- Update to use CSS, at least for header bars
- Also, if it is easy to give the header bars rounded corners,
we should probably do so. But if it is hard, it isn't
important enough to matter.
- The Nmap.Org navigation table should have a background and more
subtle lines, like we use for our calendars now.
- Then do the same with seclists.org, insecure.org, sectools.org
- The icon on the top-left of the screen should be for (and link
to) the root URL of current site. e.g. seclists.org,
sectools.org, nmap.org rather than always insecure.org.
o [NSE] HTTP header parsing is not very robust, and is duplicated in a
lot of places. For example, it's legal to have header fields like
Content-type:\r\n
___text/html\r\n
(with spaces in place of _, but http.lua won't parse such a header
correctly. In other words you can extend them to any number of lines
as long as each line after the first begins with whitespace. [Joao]
o Scanning through proxies
o Nmap should be able to scan through proxy servers, particularly now
that we have an NSE script for detectiong open proxies and now that
Ncat can act as proxy client or server.
o Requirements:
o Would be nice to be able to chain through multiple proxy servers of
different types.
o Would be nice to be able to spread the load amongst multiple
proxies.
o Should support port scanning, version detection, and NSE. In
other words, nsock should support proxies.
o Support IPv4 and v6
o Need to figure out how to get good performance. Pool of
connections to proxy or proxies for concurrency? HTTP pipelining?
o Support the different varieties of proxies: socks4, socks4a,
socks5, HTTP GET (if possible), HTTP CONNECT. Note that GET
proxies present some challenges since the error messages may not
be standard, etc.
o Maybe auto-detect the proxy type so that Nmap can try the most
efficient scanning method first?
o I've been asked to support basic, ntlm, and digest authentication
if possible.
o Implementation ideas:
o There is a patch by Zoltan Panczel (http://nmap-dev.fw.hu) and it
has been improved by Jacob Appelbaum in nmap-exp/ioerror/ . This
patch doesn't handle things like parallelization, but it may be a
good proof of concept.
o This might not be appropriate for ultra_scan ... perhaps would be
better to write a general scanning engine for abusing
applications for port scanning purposes. This could handle
scanning through proxies and the existing FTP bounce scan would
also be ported to this engine (or, frankly, we could probably get
away with removing FTP bounce). rembrandt at jpberlin.de tells me
that you can also do this with the "forwarding" commands on IMAP
servers. Whoever does this should probably start by reading the
code for the main port scanning engine (ultra_scan()) and also
the version detection code (service_scan()). And the version
detection paper at http://nmap.org/book/vscan.html. If you
understand all that, you may be ready for this project :). This
is important, because it is easy to do poorly. The tough part is
high performance and clean code which is general enough that all
these different applications can be scanned through using the
same basic engine. You should run your ideas by nmap-dev in as
much detail as possible before starting.
o Move nmap/docs/TODO into its own todo directory (probably nmap/todo)
and then encourage maintainers of /status/ TODOs and any other TODOs
to migrate theirs there. Unlike the status directory, /nmap/todo
would be readible by anyone. [Fyodor]
o [NSE] Improve username/password library (the database files
themselves). We don't have very good lists at the moment. Maybe
work in combination with Ncrack dev.
o We've improved the ncrack files--we should probably either use
those for NSE or use a subset of them.
o perhaps from Solar Designer. (he sent us permission)
o perhaps add phpbb hack data (there is at least a list of 28,635
passwords in phpbb_users.sql, and possibly more in other files.
o Remove smtp-open-relay.nse sometime after 9/24/09 if nobody adopts it (see
http://seclists.org/nmap-dev/2009/q3/0986.html).
o Add Nmap web board.
o Create Nmap wiki
o After the new -sn and -PN options (added to SVN around 7/20, just
after the 5.00 release) have been around long enough to be in most
people's copy of Nmap (e.g. in all the versions we distribute from
download page (stable+dev)) for at least a few monts, we'll document
these as the preferred version rather than -sP and -PN. These match
-n, and the main problem with -sP is that we now use it more for
"disable portscan" than ping only. For example, you can also use
NSE, traceroute, etc. [David]
o Consider moving UDP ping/portscan payloads from payload.cc to a
custom data file so that it is cleaner to maintain and users can
more easily disable/change probes. [David]
Things to think about for an external data file:
o Many ports may share the same payload.
o A port may want more than one payload, perhaps falling back to a
second one if the first one fails.
o Some probes may have to come from a specific source port.
o Some protocols may require variable payloads, for example IKE
benefits from a random initiator cookie so that packets after the
first don't get ignored for looking like retransmissions.
o TFTP sends its response from an ephemeral port, not port 69.
o [Ncat] Drop privileges once it has started up, bound the ports it
needs to, etc.
o [Ncat] This may sound ridiculous, but I'm starting to think that
Ncat should offer a very simple built-in http server (e.g. for simply
sharing files, etc.)
o [Web] Consider adding training/introduction videos to the Nmap site
o Would be great to have a (5 minute or less) promotional video
introduction to each tool (Nmap, Zenmap, Ncat, Ndiff) on its web
page.
o They need to be good to be useful--the sort of the quality you see
in Laura Chappell's Wireshark videos or James Messer's Nmap videos
or Irongeek's videos (http://www.irongeek.com).
o Besides the promotional videos, users would probably enjoy more
in-depth video instructions (e.g. covering the Nmap Network
Scanning topics).
o Here's an example product page with lots of videos (we may not go
that far): http://www.splunk.com/product
o The Zenmap translation system
(http://nmap.org/book/zenmap-lang.html) has been pretty successful
so far. We should consider doing the same for Nmap. After all, we
already have the reference guide in 16 languages at
http://nmap.org/docs.html. We should definitely try to use the same
translation methods for Zenmap as we do for Nmap. In fact, maybe we
can create a combined PO file Nmap, Zenmap, Ncat, and Ndiff so that
they can all be translated and maintained together. Something to
consider: calling setlocale can change the behavior of functions like
isalpha. Locale-dependent functions need to be checked for security
risks.
o Consider changing Nsock so that it is able to take advantage of more
modern interfaces to dealing with large sockets, rather than just
select. Perhaps we should look at poll(), Windows completion ports,
and some of the advanced Linux APIs. Select() limits us to
descriptors no higher than FD_SETSIZE, and it may not performa all
that well. We should do some benchmarking and decide on the
interface to use for each platform. May want to take a look at
libevent (http://www.monkey.org/~provos/libevent/) for inspiration.
The libevent home page has some interesting benchmark graphs too.
[Josh implemented poll as a SoC student, but it had problems with
Nsock's architecture. O(1) lookups were becoming O(n) because of
the nature of the data structures. It was slower in his benchmarks.
Nsock would have change from a model of "loop over the event list,
and check to see if the fd for each event is set," to one of "loop
over the fd list, and see if there is a corresponding event for
each. It is the "see if the fd is set" operation that's O(1) with
select (it's FD_ISSET) and O(n) with poll (it's a traversal of a
linked list).]
o [NSE] Add DNS based service discovery script. See
http://seclists.org/nmap-dev/2009/q3/0786.html for more of this idea
from David.
o Further investigate SCTP functionality, as some people reported
problems (see this thread:
http://seclists.org/nmap-dev/2009/q2/0669.html)
o [NSE] Consider whether we should include some sort of NSE debugger. Or we
could include something simpler. For example, some developers (such
as Ron) already make use of Patrick's traceback.nse in their
experimental trees. For some inspiration/ideas, look at Diman's NSE
debugger (http://seclists.org/nmap-dev/2008/q1/0228.html) and also
Patrick's traceback.nse
o [NSE] We may want to consider a better exception handling method --
one which doesn't require wrapping every I/O line in its own try
function call. David says "Lua has an internal "exception handling"
mechanism based on a function called pcall, which is implemented
with setjmp/longjmp. You can wrap a function call in it and the
function will return there whenever there's an unhandled error.
Something based on that would be better [than the current system], I
think."
o [NSE] Look into moving packet module to C for better performance
[Patrick]
o [NSE] Consider whether we need script.db for performance reasons at
all or should just read through all the scripts and parse on the fly.
See: [http://seclists.org/nmap-dev/2009/q2/0221.html]
o [NSE] Support routing http requests through proxies.
o [NSE] http improvements
o Spidering library+scripts? How should the spider store the results
and make them available to other scripts? How do we limit
bandwidth consumption and total amount of data stored? Might want
to look at enumeration script at
http://seclists.org/nmap-dev/2009/q1/0889.html
o URL grinder checks for existence of applications in common/default
paths. Scanning http paths to see if they exist is in some ways
similar to scanning to see which ports are open.
o Cookie suppport? Might be useful for spidering sites which use it
for authentication/authorization/personalization.
o HTTP persistant connections/keepalive? May make
spidering/grinding/auth cracking more efficient
o Pipeliing? May make spidering/grinding/auth cracking more efficient
o [NSE] High speed brute force HTTP authentication. Possibly POST and
GET/HEAD brute force cracking.
o Investigate and document how easy it is to drop Ncat.exe by itself
on other systems and have it work. We should also look into the
dependencies of Nmap and Zenmap. It may be instructive to look at
"Portable Firefox"
(http://portableapps.com/apps/internet/firefox_portable) which is
built using open source technology from portableapps.com, or look at
"The Network Toolkit" by Cace
(http://www.cacetech.com/products/network_toolkit.html). For Nmap
and Nping, we may want to improve our Winpcap to load as a DLL
without requiring installation. There is a separate TODO item for that.
o Consider offering a way to link Winpcap DLLs so that they start the
service as needed rather than requiring explicitly installing
Winpcap and having it start upon system boot. CACE has offered such
a thing for many years as WinPcap Pro
(http://www.cacetech.com/products/winpcap_pro.html). If we change
WinPcap in this way, we'd presumably want to also change the symbol
names as is done in WinPcap Pro. And it would mean that we have to
build our Winpcap binaries ourselves (including 64-bit). We might
even have to sign our drivers for 64-bit Windows.
o [NSE] BasicHTML/XML parser? For example, Sven Klemm wrote a script
which uses libxml2: http://seclists.org/nmap-dev/2008/q3/0462.html.
And here is one by Duart Silva using Expat:
http://seclists.org/nmap-dev/2009/q3/1093.
o [NSE] Would be great if NSE scripts could be made to NOT
run as root if they don't have to.
o [NSE] NFS query script for checking exports, etc.?
o [NSE] Web application fingerprinting script. Would be great to be
able to take a URL and determine things like "this is Joomla" or
"this is Plone" or "Mediawiki" or whatever. Rather than hard code
regular expressions or other tests in a script, it should use a
signature file like Nmap OS and version detection do. Might work in
combination with URL grinder to check for applications at
default/common locations. See also a script that does favicon
scanning TODO item.
o [NSE] Consider how we compare to the Nessus Web Application Attack
scripts
(http://blog.tenablesecurity.com/2009/06/enhanced-web-application-attacks-added-to-nessus.html).
[Joao making a list of web scripts which we might find useful,
Fyodor asking HD moore for permission to use http enum dir list]
o [NSE] Security Review
o Consider what, if any, vulnerabilities or security risks NSE has
with respect to buffer overflows, format string bugs, any other
maliciously formatted responses from target systems, etc. Maybe
address the known risk of malicious scripts too.
o Consider that NSE runs scripts as root
o Dependency licensing issues (OpenSSL, Python, GTK+, etc.)
o We should do an audit to ensure that we are in complete compliance for the
licenses of all the software we ship in any of our downloads, as some
licenses have special clauses for things like including their
license/copyright file, mentioning them in our documentation, etc.
And of course we want to credit them properly even where the license
doesn't require it. We should probably make a list of these in our
docs/ directory along with any special information/requirements of
their license. And maybe we should put the current licenses in a
subdir too. In particular, these come to mind:
o libpcre
o lua
o OpenSSL
o libpcap
o GTK+/Glib/ATK/Pango/PyGTK (Win/Mac versions of Zenmap link to
PyGTK)
o SQLite
o Python (Win/Mac versions of Zenmap link to Python)
o X.org libraries (Mac version links to them)
o libdnet
o Figure out and document (in at least the Ncat user's guide) the best
way to use Ncat for chaining through proxies. One option is this
sort of thing:
ncat -l localhost 1234 --sh-exec "ncat --proxy A.A.A.A B.B.B.B"
ncat --proxy localhost:1234 C.C.C.C
If you had two proxies A.A.A.A and B.B.B.B, connecting to C.C.C.C.
With another listener/--sh-exec pair for each additional proxy.
But perhaps we can make it easier by adding it to the syntax.
o Look into whether we should loosen/change the global congestion
control system to address possible cases of one target host with many
dropped packets slowing down the whole group. See
http://seclists.org/nmap-dev/2008/q1/0096.html .
* Related possibility: Fix --nogcc to gracefully handle ping scans.
Right now it seems to go WAY TOO FAST (e.g. several thousand
packets per second on my DSL line).
o We should document an official way to compile/test refguide.xml so
people can more easily test their changes to it. This will probably
involve moving legal-notices.xml into /nmap/docs, among other
things.
o Make Zenmap settings get upgraded when the Zenmap executable is
upgraded. The per-user configuration files such as scan_profile.usp
and zenmap.conf are never overwritten once installed by Zenmap, so
changes and fixes to those files don't reach anyone who has
installed Zenmap already. This is most noticeable with changes to
profiles and highlight definitions are notably affected. This fix
may involve hard-coding settings that are not normally configured by
users (like highlighting) or updating the per-user files at startup
(only those parts that haven't been changed by the user).
o Zenmap should be able to export normal Nmap output
o Zenmanp should perhaps be able to print Nmap output (if not too much
of a pain to implement.)
o Start project to make Nmap a Featured Article on Wikipedia.
o Consider rethinking Nmap's -s* syntax for specifing scan types
o Current problems with this -s syntax:
o We already use like 20 of the 26 letters, so we end up with
things like SCTP scan using -sY
o Can make Nmap command lines hard to read, particularly given
that we often need to improvise to find a letter which isn't
taken.
o Problematic for scan types -sI and -b which require arguments
o Inconsistencies. For example, -sC and -sV do script scan and
version detection, respectively, and yet for OS detection we use
-O. Also, control flow (-sP, -sL) is used with -s, which further
overloads the options.
o Possible solution:
o We are enabling -Pn and -sn as preferred notations for -PN and
-sP which mean "no ping" and "no port scan". Those match the
already existing -n for "no DNS". The problem with -sP is that it
implies "ping only", when what it really should mean is "disable
port scan" because you may want to do NSE, OS detection,
traceroute, etc. still.
o We might want to just give them normal option strings, so you
could do --maimon instead of -sM, for example. For extremely
common options such as SYN scan, UDP scan, version detection, we
could perhaps find good single letter options as an alias to the
longer one.
o Another idea is to use something like --scantype syn,udp,sctp,
which is a lot longer for single-type scans, but shorter when
you're combining mulitiple ones. Doesn't allow for individual
scan arguments easily. I (Fyodor) think I prefer the idea above
of just givem them top level arguments.
o If we keep -s*, we could just give it one defined function, such
as selecting port scan type, or control flow.
o Obviously this will take some discussion/brainstorming on nmap-dev.
o libnmap organization for UNIX and Windows
o Then change Nmap and Zenmap to simply call this library
o It is interesting to look at: http://www.gnupg.org/gpgme.html
o Improve the "run Zenmap as root" menu item to work on distributions
without su-to-root. We might even want to improve Zenmap so that it
itself does not have to run as root, and just executes Nmap that
way. Rather than not showing Zenmap as root on the Menu of
non-working systems, it might be better to have it but let it give
an error message (and then, perhaps, run as nonroot) so that users
of those distributions are more likely to contribute a fix. We also
might want to look at how the distributions themselves package Zenmap.
o Consider enhancing the new OS Assist system to handle version
detection too. [SOC task?]
o Do -p- Internet UDP scans.
o Deal with UDP retransmission for version detection ( I think I
should just do a second run of all probes for UDP if it fails to
match anything). The advantage there is that no retransmissions are
neccessary if the service is found. Then again, per-probe
retransmission would let us redo the most likely probes (the one(s)
that match the port number) quickly. Lost packets should probably
affect ideal_parallelism.
o Nmaprc-related - Create a system to store Nmap defaults/preferences
in an nmaprc file.
o nmaprc should be in ~/.nmap on UNIX
o On Windows, we may need a registry key to find the .nmaprc
o Obtain Nmap data directory information from nmaprc at runtime rather than
compiled in -- among other advantages this is needed to make
relocateable rpm.
o Make RPM relocatable (requires somehow avoiding storing paths in the
binary)
o Perhaps Lua could be used as the format?
o .nmaprc for keeping defaults, etc.
o Nmaprc infrastructure, hook to new timing variables
o Nmaprc man page
o Default timing mode
o Default NSE arguments, such as user agent
o Maybe Default source IP (-S) argument
o should be a way to specify your own .nmaprc
o Maybe lets you add a directory and template for saving all
scans.
o Search for nmap on google news, on google web, and add appropriate
links to press page and the like.
o Nping -- like hping3 but uses Nmap infrastructure and to a
large degree the same command-line options as Nmap.
o Make version detection and NSE timing system more dynamic so that
the concurrency can change based on network conditions/ability.
After all, beefy systems on fast connections should be able to handle
far more parallel connections than slower systems.
o Website: Create shr (shared) directory in svn, which will contain
directories shared between the Insecure.org network of sites
(e.g. templates, error, css). Then sites such as sectools,
nmap.org, insecure.org can just check that out via externals
declaration (or, I suppose, symlink). CSS directives will then use
/shr/css/insecdb.css etc. ). [Fyodor]
o Zenmap script selection interface for deciding which NSE scripts to
run.
o Get new Zenmap logo
o consider putting back on top-right of command constructor wizard
(there used to be umit logo there).
o Maybe that can be done after the release by soliciting ideas.
o Make Zenmap splash screen
o nmap.cgi web interface for Nmap
-- Should have "demo" mode that only allows users to scan their own addy
o Create or collect some great ./configure ascii art.
o Add randomizer to configure script so that a random ASCII art from
docs/leet-nmap-ascii-art*.txt is printed. I think I'll start naming
them leet-nmap-ascii-art-submittername.txt.
o Add general regression unit testing system to Nmap
o Talk to Libpcap folks about incorporating (at least some of) my
changes from libpcap/NMAP_MODIFICATIONS.
o Add --evil to set the RFC3514 evil bit.
ftp://ftp.rfc-editor.org/in-notes/rfc3514.txt
o We're not going to add this right now.
o The Nmap web page is beginning to show its age. Ah, who am I
kidding, it was showing its age 5 years ago :). It could do with an
upgrade to XHTML+CSS. It could also do with a whole redesign, but I
think that can be done as a second step after converting to
XHTML+CSS with roughly the same look. Though adding a few more
modern touches (like hover interaction on the menu bar) wouldn't
hurt. This is a moderatly big project, which will involve: o
Designing the new XHTML+CSS to look similar to the current HTML
pages, but be extensible enough that it can be redesigned in the
(near) future by mostly just changing the CSS and graphics.
o Converting the existing Nmap pages to the new XHTML format.
This will likely include using open source programs and likely
modifying them or creating your own scripts to help with the
process. To apply for this task, you need to have some web
development experience and an example XHTML+CSS web page you
have created online.
o Provide an option to send a comment in scan packet data for target
network. Examples: --comment "Scan conducted by Marc Reis from
SecOps, extension 2147" or --comment "pH33r my l3eT
s|&lt;iLLz! I'll 0wN UR b0x!"
o Note, this shouldn't be implemented yet.
o Consider implementing RPC scan with ultra_scan or something else.
Right now it is the only program using pos_scan. On the other hand,
I'm not sure TCP rpc scanning is appropriate for ultra_scan.
o Look at all the pcap functions, there are some like
pcap_findalldevs() which could be quite useful. There are mails to
the Nmap list relating to suggested improvements --
http://seclists.org/lists/nmap-dev/2004/Apr-Jun/0024.html .
Actually I do indirectly use that for Windows. I wonder if they work
for UNIX?
o perhaps each 'match' line in nmap-service-probes should have a
maximum lines, bytes, and/or time by which a response should be
available. Once that much time (or many bytes or lines) have passed,
that match can be considered 'failed' and ignored in subsequent runs.
Once all matches are considered failed, that probe is done. This
could be a useful optimization and is arguably better than the less
granular 'totalwaitms'. Or I could just have a simple function that
looks at whether a given regex could possibly match something
starting with the received data (not too hard since almost all of
the current regexes are anchored). But before doing this, I should
look long and hard at how many of the probes have every match
capable of doing this. In particular, many of the softmatch lines
don't offer many chars anchored at the front.
o Add detection of duplicate machines via IP.ID uber-technique.
Maybe I should use uptime timestamps too. Oh, and MAC addresses too.
o Separate nbase into its own Windows library in the same way as Andy did
with iphlpapi .
o Look into iplog ( http://ojnk.sourceforge.net/ ) -z option which is
supposed to fool OS detection.
o More security auditing of Nmap code (it never hurts to do more proactive
security auditing).
o Nmap / Nmap-hackers FAQ
o random tip database
DONE:
o Consider converting this file to emacs org-mode
(http://orgmode.org/) format. [Fyodor]
o That format is still plain text and can be read/edited by vi
users, etc.
[Considered, but I don't think I'll change right now]
o Windows 7 RTM Nmap testing (With particular attention to 64-bit and
our pcap installer). [Fyodor]
o We should print host latency (when available) in the XML output, as
suggested at http://seclists.org/nmap-dev/2009/q4/215.
docs/nmap.dtd will have to be modified accordingly, and you might
even consider adding support to docs/nmap.xsl.
o Integrate latest OS fingerprint submissions and corrections. This
was last done based on submissions up to May 8, 2009.
o Potential OS X 10.6 problems. There are two issues reported by the
same user which may be related:
http://seclists.org/nmap-dev/2009/q3/0936.html,
http://seclists.org/nmap-dev/2009/q3/0996.html. One is that Nmap
hangs doing nothing and needs to be killed with Ctrl-C, and the
other is that it dies after printing "Initiating UDP Scan". Another
reported the same problem at
http://seclists.org/nmap-dev/2009/q3/0990.html, where it dies after
the first ARP request is sent. But Brandon has run Nmap on 10.6
without problems. It is a bit of a mystery. [David] [Resolution:
Apple fixed the problems in 10.6.2; For users who have 10.6 and
10.6.1, the versions David builds on 10.5 will still work for them
because they are 32-bit binaries rather than 64. Users who build
Nmap on 10.6 or 10.6.1 should compile with -m32 or update to 10.6.2]
o [NSE] Patrick's worker thread patch:
http://seclists.org/nmap-dev/2009/q4/294
o Investigate get_rpc_results error (infinite loop) reported by Lionel
Cons. See these threads: http://seclists.org/nmap-dev/2009/q4/24,
http://seclists.org/nmap-dev/2009/q4/120
o Upgrade to latest version of NSIS on Nmap Win build system [Fyodor].
o Standardize on a proper file header for the Zenmap source code. [David]
o For now, David is going to augment the templatereplacement system
to insert the normal nmap.header.tmpl, but change the comment format
to work with Python, and then replace the current Zenmap headers
with that.
o We may want to look into if/how we support IPv6 nameservers. Here
is a bug report from someone having a problem with them:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=539244 [Ankur]
o Once all the man page languages are in the Nmap tarball, we should
update our install system to install them in the appropriate place.
We'll want to integrate this with configure so users can decide which
languages they want. See http://seclists.org/nmap-dev/2009/q4/249.
o Resolve allow_ipid_match issue which can cause some malformed
replies to be ignored when we might be able to still use them. See
this thread: http://seclists.org/nmap-dev/2009/q2/665 [David]
o Fix Zenmap 'make install' TypeError issue
(http://seclists.org/nmap-dev/2009/q4/225). [David]
o Fix a bug in which Nmap can wrongly associate responses to SYN and
ACK host discovery probes. [David]
For example:
# nmap -sP -PS80 -PA80 australia.gov.au --packet-trace -d2
SENT (0.0760s) TCP 192.168.0.21:60182 > 152.91.126.70:80 S ttl=43 id=13466 iplen=44 seq=4046449223 win=4096 <mss 1460>
SENT (0.0770s) TCP 192.168.0.21:60182 > 152.91.126.70:80 A ttl=48 id=39976 iplen=40 seq=4046449223 win=1024 ack=921915001
RCVD (0.3020s) TCP 152.91.126.70:80 > 192.168.0.21:60182 SA ttl=53 id=0 iplen=44 seq=3924706636 win=5840 ack=4046449224 <mss 1380>
We got a TCP ping packet back from 152.91.126.70 port 80 (trynum = 0)
ultrascan_host_probe_update called for machine 152.91.126.70 state UNKNOWN -> HOST_UP (trynum 0 time: 226875) Changing ping technique for 152.91.126.70 to tcp to port 80; flags: A
In the example above, Nmap wrongly uses ACK as the preferred ping technique, when it should be SYN. [David]
o we're thinking about ways to encode the information better. Right
now we have pingseq and tryno, but we may want to just move to a
single probe ID and then we can look up any other information in
structures attached to that ID in memory when we get the response.
o A related problem, which we hope the fix for this will also
resolve, is that replies can currently match any probe whose tryno
is less than or equal to the tryno encoded in the reply.
o However, "fixing" this problem has been shown in the past to
cause accuracy problems. See
http://seclists.org/nmap-dev/2009/q1/387. We should figure out
whether we can still reproduce that and, if so, what is going on
before "fixing" this issue.
o Add PJL (Printer Job Language) probes to
nmap-service-probes. Brandon wrote some in
http://seclists.org/nmap-dev/2009/q1/0560.html. Test them to see if
they cause anything to be printed out (on paper) with printers that
don't support PJL. If not, then remove the JetDirect ports from the
default exclude list. The script pjl-ready-message.nse also uses
PJL. We have concerns about the safety of this probe given
http://seclists.org/nmap-dev/2009/q4/61, but it still is probably
better to have the probe in there than not, as long as we continue
blocking the ports by default with the Exclude directive.
[We put in the probes, but are keeping the Exclude directives
because the probes still seem a bit dangerous]
o [NSE] in_chksum in packet.lua doesn't work with an odd number of
bytes. Also make it more efficient.
o Add --confdir option to Zenmap. See
http://seclists.org/nmap-dev/2009/q1/92 [David]
o Update our Winpcap from 4.0.2 to 4.1.1
(http://seclists.org/nmap-dev/2009/q4/128). This is a bit complex
because we have our own installer. See
http://nmap.org/svn/mswin32/winpcap/Upgrading-Instructions.txt.
o Change Nmap to not show the "Host not scanned" lines in list scan
o Change Nmap to show latency in "host is up" lines even w/o verbose
mode.
o Update our included Libpcap from 0.9.7 to 1.0.0
(http://www.tcpdump.org/) [David]
o Improve Nmap output to show the forward DNS name when specified on
command line as well as rDNS where appropriate. We're also going to
reorganize output to enable some other improvements as well. See
the proposal at http://seclists.org/nmap-dev/2009/q3/814, and that
whole thread which starts at
http://seclists.org/nmap-dev/2009/q3/805 [David].
o [Zenmap] Solve some unusual utf8 Zenmap crashes reported in the
crash reporter. David has fixed some of them so far, but there are a
few more remaining that may be related. [David]
o Change Nsock to give an error if you try to FD_SET a fd larger than
FD_SETSIZE. [Brandon]
o Some research from David:
We have help off on this change because of Windows portability
problems. The Windows fd_set works differently than the Unix
fd_set. In Unix, FD_SETSIZE (which is typically 1024) is both the
maximum number of file descriptors that can be in the set and one
greater than the greatest file descriptor number that can be
set. In other words, we want to bail out whenever someone tries
to FD_SET file descriptor 1060, for example. But on Windows it's
different: FD_SETSIZE is only 64, but any file descriptor
numbers, no matter how great, may be stored in the set. Windows
socket descriptors are typically greater than 1023, but you can
only have 64 of them in the set at once.
So the fix on Unix would be
--- nsock/src/nsock_core.c (revision 15214)
+++ nsock/src/nsock_core.c (working copy)
@@ -97,6 +97,7 @@
do { \
assert((count) >= 0); \
(count)++; \
+ assert((sd) < FD_SETSIZE); \
FD_SET((sd), (fdset)); \
(max_sd) = MAX((max_sd), (sd)); \
return 1; \
@@ -107,6 +108,7 @@
assert((count) > 0); \
(count)--; \
if ((count) == 0) { \
+ assert((sd) < FD_SETSIZE); \
FD_CLR((sd), (fdset)); \
assert((iod)->events_pending > 0); \
if ((iod)->events_pending == 1 && (max_sd) == (sd)) \
But that doesn't work on Windows (I just tried it) because even
the smallest socket descriptor is bigger than FD_SETSIZE, 64.
Really we're trying to accomplish two different things on the two
platforms: On Unix we must not store a file descriptor greater
than 1023, no matter how many or how few other descriptors have
been set. On Windows we must not set more than 64 descriptors at
a time, no matter what their descriptor number happens to be.
o Add a way in NSE to set socket source addresses and port numbers.
See this thread: http://seclists.org/nmap-dev/2009/q3/821. Some
potential solutions are discussed later in the thread.
o [Ncat] Fix --max-conns on Windows so that it only counts concurrent
connections and not long-dead ones. See this thread
(http://seclists.org/nmap-dev/2009/q3/1017.html) and particularly this
message (http://seclists.org/nmap-dev/2009/q3/1032.html) for
details. Venkat has a patch for David to review and potentially merge.
o [Ncat] Fix 100% CPU usage with ncat -l --send-only. See this
thread: http://seclists.org/nmap-dev/2009/q2/797 and continues
further at http://seclists.org/nmap-dev/2009/q3/99. This message is
key: http://seclists.org/nmap-dev/2009/q3/308 [David]
o [Seclists] There is currently some extra vertical space after the
first post of a thread in the thread index (example:
http://seclists.org/nmap-dev/2009/q4/index.html).
o [NSE] Decide which scripts belong to the "safe" category (we now have 20
which aren't either safe or intrusive), then remove the intrusive
category since people can now specify "not safe". See
http://seclists.org/nmap-dev/2009/q3/1091.html and that whole
thread. [Fyodor]
[ OK, see http://seclists.org/nmap-dev/2009/q4/0002.html]
o [NSE] Fix http pipelining. Responses are being split on anything
that looks like HTTP/1.X which doesn't come at the beginning of a
line, and doesn't work when a line like that happens to legitimately
come in a body. Joao has an nmap-exp branch which resolves this
issue, though David found some bugs in that and sent some hard test
cases. [Joao]
o Fix traceroute performance/algorithms. It is terribly bad in some
cases. For example, this traceroute scan took 36 minutes against a
single host(!): http://seclists.org/nmap-dev/2009/q3/0425.html . We
don't need to go up to hop 50 in such cases (maybe some heuristic
like "at least go to hop 15, and stop after 5 unresolved in a row).
And more importantly, there is no reason each hop should take 40s to
timeout. It should probably use timeout variables like we use in
port scanning. And it should parallelize as much as possible. Even
if parallel resolution means we went a little further than we had to
in incrementing the TTL, and we go to hop 15 when host is at 12
that's no big deal (of course we would only report up to hop 12 in
the output). Once we do this, we should put back the ability to
make --traceroute work even when we haven't found a probe which
elicits a response from the target. (that feature was added in July,
but we'll probably take it out until we can fix
performance). [David]
o Fix four Nmap bugs discovered by Ankur and analyzed a bit by
David. [Ankur]
o [NSE] Consider HTTP request caching.
o [NSE] Finish (or write new) favicon fingerprinting script. See
http://seclists.org/nmap-dev/2008/q4/0583.html . May need to do
some more scanning and increase the DB size a bit. May or may not
want to later combine this as part of a larger webapp fingerprinting
script.
o [Zenmap] When the inventory is changed, the current host/service selection is
forgotten and the Ports / Hosts tab is switched to hosts mode. It should
remember your current selection and not change the view. [David/SoC]
o Device categorization improvements
o Examine Nmap's device categorization in nmap-os-deb and
nmap-service-probes. Decide if some small categories which have
never really took off should be consolidated, or whether others
should be split off. For example, maybe there are some groups in
'specialized' or other misc. categories which are now large enough
to split off. Personally, I wouldn't give anything its own
category unless there are at least half a dozen of them and no
other category really fits them well. We should use a combined
system for nmap-os-db and nmap-service-probes.
o Add a classification sect1 to os-detection.xml
(http://nmap.org/book/osdetect.html) to cover how Nmap handles OS
classification. It should include a list with descriptions of
each device type recognized by Nmap. Version-detection.xml should
reference (link to) it in the approprate place.
[Doug has done some initial work on this. For example, see
nmap/docs/device-types.txt] [David]
o Consider what new UDP payloads we might want to add. David has many
ideas at: http://seclists.org/nmap-dev/2009/q3/0290.html
o For traceroute we should give some indication that the RTT is in ms.
Changing the column header to maybe "RTT MS" or "RTT (MS)" would
probably do the trick or we could append "ms" to each value.
[David]
o OS fingerprint should probably specify somewhow when DS=1 if it's
because target->directlyConnected is true, or because it sent the
distance probe and calculated a distance of 1. The second situation
should never happen, but often David strongly suspects that it is the
case.
o --traceroute should probably set currenths->distance because right
now, I do an -O scan against scanme.nmap.org, and it does not figure
out the distance. So the fingerprint shows no distance element and
Nmap doesn't print "Network Distance" in the results line. That may
be OK (Nmap probably isn't receiving the probe response needed for
this, and maybe doesn't want to print the TG), but even when I do
--traceroute I get no distance printed. Yet Nmap clearly knows the
distance since the traceroute shows all the hops up to and including
the target (scanme.nmap.org).
o Figure out best favicon to use for Nmap and related web sites
[David]
o [Ncat] David says: "After you get EOF on stdin with --send-only, the
program hangs on until the idle timeout expires instead of terminating
immediately. I had a fix for it but it involved deleting events in
the Nsock queue and it caused an assertion failure in Nmap so I backed
it out. I have a less intrusive solution." [David]
o We should update our config.{sub,guess} files. This Debian bug
#542079 requests that we do so:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=542079. We last
updated on 3/15/08 and in that case we used versions from
http://cvs.savannah.gnu.org/viewvc/config/?root=config. That may or
may not be the best place to get them now (e.g. perhaps there has
been a recent official release). [David]
o Look a bit more at default version detection timing. Particularly
deciding the number of probes to run in parallel. [ We increased
that a bit on 8/18/09]
o [Ncat] Right now our -i (idle timeout) causes Ncat to quit if EITHER
reading or writing is idle for the given amount of time. But it is
really only idle if BOTH reading AND writing are idle for the
period. We should make the code work that way.
o Add scripting.xml documentation on strict.lua and the avoidance of
global vars in libraries. See
http://seclists.org/nmap-dev/2009/q3/0169.html. Probably a new
section just above "Adding C Modules to "Nselib", such as "Writing
Your Own Library" or somesuch. [Patrick]
o Update nsedoc to refer to 'libraries' rather than 'modules'. This
affects the front page (which calls them 'Libraries' on left sidebar
and 'Modules' on the list of right, and affects the url (we should
change /modules/ to /lib/ and then have Fyodor add a redirect for
people still using old URLs) and the title of the module pages like
http://nmap.org/nsedoc/modules/base64.html. [Patrick]
o [Ncat] Prefix Ncat stderr messages with "Ncat: " to make it clear
that they are coming from Ncat and not the remote server (or typed in
by user). [David/SoC]
o [NSE] Optimize NSE Performance--e.g. measure the current performance and
see what can be improved in terms of scheduling scan threads,
determining how many to run concurrently, looking at CPU load items,
etc. [David/Patrick]
o Increase version scan concurrency based on Patrick's performance
testing. We decided to go to 20 for timing_level 3, 30 for 4, and 50
for 5.
o [NSE] Consider POST/HEAD support. See
http://seclists.org/nmap-dev/2009/q1/0889.html.
o Implemented: http://seclists.org/nmap-dev/2009/q3/0074.html
o Joao going to check in very soon soon.
o [NSE] Consider Rob Nicholls http-enum script for incorporation:
http://seclists.org/nmap-dev/2009/q1/0889.html
[Joao tested w/his HEAD support, is going to check this in]
o Consider the open proxy scripts more carefully
- How should we test whether the proxy attempt was successful? Right
now we look for a google-specific Server header after trying to
reach http://www.google.com through the proxy. Maybe we should let
users specify their own pattern if they specify their own URL.
[ Joao is going to check it in today (7/28)]
o I should add code to Nmap to bail if sizeof(char) isn't 1.
Otherwise there could be security risks if it is not one on any
platforms. [ Actually, we think C standard requires this and we've
not heard of any system where sizeof(char) isn't 1. So removing
this item.]
o [Zenmap] More complete implementation of ZenmapCommandLine/profile
editor improvement ideas. See
http://www.bamsoftware.com/wiki/Nmap/ZenmapCommandLine. [David]
o [Ncat] Think about whether we should offer "-q secs" (quit after EOF
+ delay of secs) and/or -k (set SO_KEEPALIVE on socket) (or maybe
that should be set by default). Anyway, these were suggested here:
http://lwn.net/Articles/341706/ [We're going to fix -i (added
separate item), and not worry about SO_KEEPALIVE unless we see more
demand for it. It doesn't seem that nc110 or OpenBSD nc or so-called
GNU Netcat support SO_KEEPALIVE either]
o [Ncat] In verbose mode, I'd like to see clock time (duration) and
maybe in/out traffic stats when a client connection ends. Maybe it
could use a format similar to what Nmap provides. [David/Venkat]
o Seriously consider making --traceroute work even when we haven't
found a probe which elicits a response from the target. We'd just
have to pick a probe in that case (probably echo request, as we
found that to be the most effective in prev. empirical testing).
This is similar to UNIX traceroute and Windows tracert.exe which
just pick a probe (high UDP port on UNIX, ICMP echo request on Win).
Even if the host is down or something, we usually get some useful
hop information.
o [NSE] Allow spaces in script arguments without the user having to
manually quote them (beyond normal shell escape quoting). See:
http://seclists.org/nmap-dev/2009/q3/0090.html
[Patrick]
o [Ncat] Support SCTP now that Nmap does.
- See client support patch by Daniel Roethlisberger:
http://seclists.org/nmap-dev/2009/q2/0609.html
- Server support?
- Daniel has a patch, David looking to apply once an nsock thing is fixed.
o Look at etc/payloads.conf in unicornscan-0.4.7 and see if they have
any which we don't have, but should, for our version detection.
They have a decent collection there. KX sent some other programs we
should look at too. [David]
o Ncat should give it's ethernet cat ASCII logo after
configure--similar to the way that Nmap, Ncrack, and Nping
do. [David/SoC]
o [Zenmap] The Search dialogue is helpful for finding a certain scan
you've performed recently, but we should probably also offer a similar
function for searching for certain applications/hosts within a scan
(e.g. find all the hosts running Apache). This new functionality
might be a find option or some other mechanism rather than being
part of the Search dialogue proper.
o Ncat SSLv2 issues. See
http://seclists.org/nmap-dev/2009/q1/0319.html. A big part of it is
done, which was enhanced version detection probes to detect more SSL
servers, The defect that remains is that Nsock can't connect to a
small fraction of servers (including some of the ones detected by
the new version probe). They are the servers that do only SSLv3 or
TLSv1 and don't respond to a SSLv2-compatible ClientHello. Even
though most servers don't support SSLv2, they usually respond to the
ClientHello and just don't offer any SSLv2 features. [David/Venkat
working on this]
o Deadlock identification and correction:
o Plan of action: implement freeing of script mutexes when scripts
exit without freeing them (done and in /nmap now). And then if it
continues to be a problem we'll consider this other stuff:
o Add detection for deadlocks and print which threads are involved.
o use above results to make a strategy for automatic deadlock resolution.
o Original entry: Figure out what to do about NSE mutexes:
http://seclists.org/nmap-dev/2008/q3/0276.html . In particular, they
are not currently cleaned up if a thread dies or otherwise exits
without unlocking them and can cause endless deadlocks which are
annoying to users and can be difficult to debug :(. Patrick has
some ideas for this in his SoC09 proposal:
"Adding a cleanup system for NSE that is called periodically
similar to nsock_loop. There would be a registration system
allowing C libraries to register a Lua function that will run
periodically to check for irresolvable deadlock or simply dead
resources. For example, the nmap library would register a mutex
cleanup handler which would inspect all mutexes looking for a dead
thread or circular dependencies. The nsock library could register
a handler that checks for unused sockets. The nsock may save a
strong reference to the thread that owns the socket and inspect it
to determine if the thread is dead."
David later says: "After some discussion we decided to start more
modestly, first by ensuring that a scripts mutexes are released when
it dies for whatever reason. I have a hunch that this is the cause
of most deadlocks. It was certainly the cause of two whois.nse
deadlocks I found. Then, the next step if deadlocks continue to be a
problem, is to do automatic detection and just print out a list of
what scripts are involved. It could be that several smb scripts are
deadlocked, or as in the case I observed where whois.nse was locked
with itself."
o Joao is auditing his Lua code to make sure all his variables are
local where appropriate. [Joao - done, should be commited very soon]
o [NSE] We need to deal with libraries which improperly use global
variables, as that is very common (Patrick made a list:
http://batbytes.com/bad.txt). Solutions could involve augmenting
our runtime system (the "strict.lua" approach) to detect/prevent the
problem, a script we run occasionally to identify issues that we
then manually resolve, or, at the very minimum, documenting
somewhere in scripting.xml the dangers inherent in global variables
and warn people to generally declare them local instead. We have a
long history of bugs caused by non-local variables defined in NSE
libraies and often causing deadlocks.
o The Nmap refguide (http://nmap.org/book/man-performance.html) says
"The --max-parallelism option is sometimes set to one to prevent Nmap
from sending more than one probe at a time to hosts. This can be
useful in combination with --scan-delay (discussed later), although
the latter usually serves the purpose well enough by itself." But
when you actually try it:
# ./nmap --max-parallelism 1 --scan-delay 10 scanme.nmap.org
You can't use --max-parallelism with --scan-delay.
QUITTING!
We need to either make that work or adjust the documentation. [David/SoC]
o David changed this to a warning. Note that with --scan-dealy,
--max-parallelism is essentially 1 anyway.
o [NSE] Consider integrating HP Laserjet print PJL status-setting
script. See this thread for an example of such a script:
http://seclists.org/nmap-dev/2009/q3/0083.html (note that it is
updated during the thread). Also, see this thread:
http://seclists.org/nmap-dev/2009/q3/0092.html
o Ndiff man page should be expanded to include sample execution/output
and more fully describe its functionality. [David]
o David is going to reexamine the old coverity-reported issues (the
ones we previously marked as "ignore" because they weren't real bugs)
just to be sure that is (and is still) the case.
o Make -sP work with -PN to disable both port and ping scanning. We
need to make sure the various options still work (-O, --script,
--traceroute, etc.) with this, as many currently don't as they don't
expect this behavior, which used to be unsupported and cause Nmap to
quit with an error messaqge. It may be OK to refuse -O since that
will rarely give useful results. OTOH, -O may work on some systems
with unique closed port signatures where Nmap guesses a closed
port. Users should then be able to do an NSE-only scan with "-sP -PN
--script [scripts]" We should document this -sP -PN usage in
refguide. [David]
o Add -sn and -Pn options which are aliases for -sP and -PN. Once
they've been around long enough to be in most people's copy of Nmap,
we plan to document those as the preferred version. Those match -n,
and the main problem with -sP is that we now use it more for
"disable portscan" than ping only. For example, you still might
want to use NSE. [David]
o [NSE] Make sure all our HTTP scripts transparently support SSL
servers too. [Joao has a solution and is testing the http scripts to
make sure they don't break.]
o Resolve "memcpy overlap in getinterfaces(int*) (tcpip.cc:2987)".
See this thread: http://seclists.org/nmap-dev/2009/q2/0713.html
[David/Brandon]
o [Ncat] Print a message to stderr upon connection failure even if -v
isn't specified so the user knows what went wrong. [David/SoC]
o [Ncat] Maybe --chat should imply -l. And Maybe --broker should too?
- OTOH, we might want to extend --chat for connect mode in the
future.
[We're going to hold off on chat now, David/SoC is doing --broker]
o Consider making it easier to tell whether scripts were specified by
name on the command-line (rather than default or by class) so they
have the option of providing extra verbosity in that case. For
example, see http://seclists.org/nmap-dev/2009/q2/0563.html. We
could either provide a special function for scripts to determine
that, or we could magically adjust nmap.verbosity() when called by
those scripts. [David]
o [NSE] Figure out a way to support people who want to do script scan,
but not port scan or ping scan. One option would be to allow
--script to list scan (-sL), but perhaps a better option is to
provide a way to disable port scanning in the same way as we offer
-PN to disable ping scanning. As an example of this need, David had
to write special code to avoid ping/port scanning when doing a
whois.nse survey for
http://www.bamsoftware.com/wiki/Nmap/EffectivenessOfPingProbes. The
key for this task is to figure out how to do it from a user
interface perspective and then implement and document it. We've
already been going in the direction of allowing script scanning in
more types of scans--a while back we started allowing it with -sP
ping scans due to high demand. [David/SoC]
[ We decided how we're going to do it (-sP -PN to start out with;
leading to eventual -sn -Pn) and added new TODO entries for actually
doing the code/docs. ]
o Ndiff should be able to show NSE script result changes. [David]
o Get set up for Coverity scan of latest version to see if it catches
any important issues before stable release. [Fyodor,David]
[Found 7 new results, 3 are real bugs, and 2 have been fixed so far]
o [nsock] Fix Makefile to handle dependencies correctly (if that turns
out to be the problem). See
http://seclists.org/nmap-dev/2009/q1/0629.html. o Or it may be
related to SVN timestampling. See
http://seclists.org/nmap-dev/2009/q1/0632.html. Diagnosed by David:
http://seclists.org/nmap-dev/2009/q2/0728.html
o For at least our UDP ping probes, Nmap should probably notice if it
is a very well known service port such as 53, 161, or 137 and send
an appropriate probe packet (server status for DNS, public community
string query for SNMP, etc) rather than empty data in that case.
This is similar to the way our IP protocol probes automatically
include common headers such as TCP and UDP if that common protocol
is given. Good probes for these services are already available in
nmap-service-probes, though we might want to make a custom file for
this. We should probably do this for port scanning as well. [David]
o [NSE] Make NSE work better for SSL tunneled services in general by
supporting them easily in the libraries. For example, I don't think
irc-info.nse currently works against all the servers which tunnel
over SSL. Maybe augment comm library, etc. [Joao - done, except for
http, which is already a separate TODO item]
o Update scripts which use table args to use pseudo-table format
"name.arg" rather than requiring the user to create a Lua table
themselves. On the lua side, it's not really being stored in a
table, but just an arg named "name.arg". [Joao]
- Look at all our existing scripts which use tables
(dns-zone-transfer, whois, the proxy scripts, etc.) and change as
appropriate. Remember to change the usage throughout the script
and also change the nsedoc script arguments and example usage.
For the existing scripts, try to retain the table version check
for now to avoid breaing backward compatability if possible. Just
add the newer style check as well.
- Is taking arguments in a table specific to a script a good idea?
The example in the socks-open-proxy nsedoc of "--script-args
openproxy={host=<host>}" is a bit of a mess and I'm not sure the
best way to document that in the script argument list. Note that
this is the standard way we've handled it for some other scripts,
so it's not an open-proxy-script-specific problem.
o [NSE] Track active sockets in the nsock library binding and don't
rely on garbage collection for reallocation. Can probably wait until
post-stable release for integration. [Patrick]
- Patrick has a patch and is waiting on dev branch to check it in.
o [NSE] Resolve ssh2.lua buffering problems
(http://seclists.org/nmap-dev/2009/q2/0673.html) [Joao]
o Decide what to do about ncat source code headers -- maybe just use
the Nmap ones. [David added the Nmap headers]
o Once we go into deep stability freeze mode, create an nmap-exp
development branches for changes we plan to integrate after the
stable release. [Fyodor]
o Update CHANGELOG for latest changes [Fyodor]
o Release 4.85BETA10
o [NSE] Open proxy detection scripts
o We have http-open-proxy.nse, but we should probably either extrand
that to handle other types of proxies (such as SOCKS and HTTP
CONNECT) or create more scripts to handle those other proxy
types. [Joao, David]
o Joao has written scripts, just need to finish up, evaluate, integrate.
o Determine whether zenmap.spec.in can currently require
"python-sqlite" rather than "python-sqlite2", or if it at least can
be easily made to do so. The former seems more compatible since
RHEL/CentOS 5.3 has a "python-sqlite" package, but not
"python-sqlite2". Meanwhile, Fedora 10 provides the "python-sqlite"
capability as long as you have the Python 2.5 package installed
(python-2.5.2-1.fc10). Fedora 10 does also make a
python-sqlite2 package available.
o [Ncat] Solve EOF issues which crop up when piping to an external
command. See http://seclists.org/nmap-dev/2009/q2/0528.html. It
sounds like we will go with Daniel's patch [Daniel, David]
o Look into building RPMs with SSL support. Statically linking to
OpenSSL on Linux for the RPMs didn't work for me last time I
tried. [Fyodor]
o Static linking of Nmap to OpenSSL does not seem to work on Fedora
10 or CentOS 5.3. The problem appears to relate to the OpenSSL
krb5 support.
o Could build my own OpenSSL libraries on the build system
(w/o Kerberos support) and link to those.
o At some point, we might want to consider including OpenSSL with
Nmap tarball. The problem is that it is rather big. Would
increase Nmap .tar.bz2 size from about 9 megs to about 12. OTOH,
OpenSSL is only going to get more and more important. Maybe we
can include a stripped down version?
o If we don't integrate OpenSSL (or until we do), we might consider
a more prominent configure warning for when SSL is not detected.
We could suggest that users run "yum install libopenssl-devel" or
"apt-get install libssl-dev" commands or whatever is appropriate
and then reconfigure. Or we could point them to a page or
nmap-dev posting URL with instructions.
o Figure out why I [Fyodor] get a bunch of "Operation not permitted" errors
when I launch a scan on SYN such as:
- I'm going to ignore this for now unless it causes me trouble
again, as this is an old machine that will be replaced soon anyway.
And we haven't been hearing of the problems from others lately.
/home/fyodor/nmap-exp/fyodor-perf/nmap -nogcc -T4 -n -v -p- --portpingfreq 250 -oA /home/fyodor/nmap-misc/logs/WorldScan/portpingfreq/logs/portpingfreq-250-1%T-%D 67.15.236.34 67.15.236.36 81.174.236.66 81.174.236.119 170.140.20.160 170.140.20.174 202.138.180.9 202.138.180.17 202.138.180.132 209.20.64.112
The errors look like:
sendto in send_ip_packet: sendto(7, packet, 44, 0, 170.140.20.174, 16) => Operation not permitted
Offending packet: TCP 64.13.134.4:59820 > 170.140.20.174:59120 S ttl=39 id=19927 iplen=44 seq=2425535549 win=4096 <mss 1460>
sendto in send_ip_packet: sendto(7, packet, 44, 0, 67.15.236.36, 16) => Operation not permitted
Offending packet: TCP 64.13.134.4:59820 > 67.15.236.36:15030 S ttl=57 id=50640 iplen=44 seq=2425535549 win=2048 <mss 1460>
Discovered open port 49394/tcp on 170.140.20.174
sendto in send_ip_packet: sendto(7, packet, 44, 0, 170.140.20.174, 16) => Operation not permitted
Offending packet: TCP 64.13.134.4:59819 > 170.140.20.174:8256 S ttl=48 id=38510 iplen=44 seq=2425601084 win=1024 <mss 1460>
May be related to connection tracking and high scan rates. See
http://seclists.org/nmap-dev/2008/q4/0652.html
http://www.shorewall.net/FAQ.htm#faq26
Others have reported similar issues even without connection tracking. See
http://seclists.org/nmap-dev/2006/q3/0277.html
http://seclists.org/nmap-dev/2007/q2/0292.html
o -PO1 and "-sO -p1" seem to send ICMP ping packets with an ICMP ID
field of 0, which we found that a small percentage of hosts drop
(61.13% responded with 0, 62% with a random value). So we might as
well randomize them in these cases. [Josh Marlow]
o Some of the -PS443 scans (and maybe other ones) we've been running
have been missing the Nmap line telling how many packets were
sent/received, even though we had verbose mode. [David/Josh]
o Deal with Ncat newline problem. See this thread:
http://seclists.org/nmap-dev/2009/q2/0325.html [David,Jah]
o Integrate SCTP scanning support. See Daniel Roethlisberger's branch
in nmap-exp/daniel/nmap-sctp. As of 4/30/09, he is nearing
completion. See http://seclists.org/nmap-dev/2009/q2/0270.html.
o [NSE] Release mutexes upon script death to prevent certain deadlocks
[Patrick, David]
o Consider whether to let Zenmap Topology graph export the images to
svg/png/etc. Also think about printing. Note that João Medeiros
has written a Umit patch to do this: [Joao, David]
http://trac.umitproject.org/ticket/316.
- Now he has Nmap patch:
http://seclists.org/nmap-dev/2009/q2/0409.html
- Consider integrating.
- Integrated!
o Ensure that when I build a distribution package on UNIX (e.g. make
distro), it builds what is in the Nmap directory I am calling it
from rather than a particular SVN version. I'm going to start
building packages from a special "clean" directory which is
different than the one I do development work in. Also, I want to be
sure that any changes in that dir are included in the release, even
if they aren't check in yet. [Fyodor]
o Nmap UNIX distro build script should regenerate script.db. [Fyodor]
o Now it is in make prerelease
o Nmap build system should be split into [Fyodor]
o prerelease -> generates version files, man pages, script.db
etc. That has to be done on one system, and then results checked in
before doing a make release. It does this stuff based on the
directory it is run in rather than some set dirname or a pure SVN
version
o release-tarballs -> does any system-dependent building and creates
the source tarballs. It does this stuff based on the directory it
is run in rather than some set dirname or a pure SVN version
o release-rpms -> Same as above, but also uses the created tarballs
to build the Linux RPM binaries for the current platform based on the
tarballs.
o Build x86 and x86-64 VM instances for RPM building. [Fyodor]
* I think I'll use CentOS 5.3
o [NSE] Script scanning does not seem to work on Fyodor's Linux
machines after being installed from latest SVN (or 4.85BETA9) and run
as a non-root user (it works fine as root). The command "nmap -sC
localhost" leads to NSE failure messages which differ based on the
exact version run. [Was a relatively simple permissions problem in
our Makefile.in -- I fixed it]
o [NSE] Release socket locks on connection failure or
timeout. [Patrick]
o Update Nmap entry on Linux Online -
http://www.linux.org/apps/AppId_1979.html
- Screw it, the site does not seem to be maintained at all. They
aren't taking updates as of 6/2/09, and even Firefox shows latest
update as 0.9.1.
o [Ncat] In verbose mode, print when an SSL connection is established
successfully and give the leaf certificate hash to make it easier to
verify when connecting to a machine where you can't or don't want to
use --ssl-verify (e.g. connecting to an ncat ssl server where it
created its own key). While we're at it, we might want to print
some other information from the leaf node, such as organizationName
and maybe localityName, countryName or something. We don't want to
be too verbose, but 1 line would be great and 2-3 might be
acceptable. [David]
o Fix NSEdoc to better escape single-quotes in fields. If we can't do
that for some reason, we need to document it better. For example,
when we initially tried generating nsedoc for
http-webdav-unicode-bypass.nse, NSEdoc was listing it as a module
named "s auxiliary module", apparently because this line exited in
the description field:
This module is based on Metasplit's auxiliary module, modules/auxiliary/scanner/http/wmap_dir_webdav_unicode_bypass.rb.
(For full example, see scripts/http-webdav-unicode-bypass.nse
r13345) [David/SoC]
o --script-args should allow a wider range of characters, and should
give a more useful error message if it receives chars it really
can't handle for some reason. For an example, try
"--script-args=smbuser=admin,smbpass=pass^word". For more details,
see Ron's report at
http://seclists.org/nmap-dev/2009/q2/0378.html.
o [Ncat] Have --ssl-cert and --ssl-key send a certificate in connect
mode so that client certificate auth can be done. [David/Venkat]
o Once we're done with host discovery empirical research, add it to
host-discovery.xml. Would be great to show the best combinations to
use for a given number of probes, the efficiency of the common probes
by themselves, etc.
o Consider making the ping scan default be more comprehensive. Note
that I got 23% more Internet boxes found out of a 50K sample (see host
enumeration chapter of my book for details). Maybe I should
experiment a bit more to ensure they are real boxes and not network
artifacts and figure out exactly which tests are helping the most.
If I do this change, I'll have to update the host enumeration
chapter. For UDP probing purposes, we should test whether including
extra data in the packet (e.g. --data-length) helps in general, and
for services such as 53 and 137, we should probably send proper
protocol headers (e.g. a DNS server status message) so that we
receive responses from listening services.
o We should probably check for a system Lua in a "lua5.1" directory
rather than just "lua", as Debian and also my Fedora 10 systems seem
to have that. See
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=527997. [Note,
Fyodor asked the bug reporter Jan Nordholz on 5/14/09 if he could
write a patch. Jan sent in a patch, it worked, Fyodor checked it in.]
o [NSE] Get rid of ceil so that floating point NSE runlevels work
again (some scripts, including (smb-brute) rely on this. They got
broken with the NSE core lua rewrite. [David].
o NSE script logical operator stuff is now documented in
scripting.xml--add to refguide.xml as well. [David/Patrick]
o [NSE] Correct nsock_connect to unlock the socket slot if the
connection fails. When a socket is closed, it is unlocked so the
arbitrator can potentially open up a socket for another thread. But
Patrick discovered that a socket is not automatically unlocked when
a connection fails or times out, only when it is closed
explicitly. So that could hold up socket allocation for other
threads until garbage collection. May be a cause of slowness or
possibly deadlocks. [Patrick]
o [NSE] Solve segfault issue which occurs when Nsock events call back
on a thread that has already ended (e.g. timeout, crash, early exit,
whatever) and been garbage collected. May want to just nsi_delete
all nsock sockets immediately upon thread ending. For an example of
this type of segfault, see
http://seclists.org/nmap-dev/2009/q2/0289.html. David says " I think
in the interests of getting this in a stable release, we should use
that strategy of closing all a thread's sockets. That ought to fix
all the problems above. Not to rule out a more thoughtful redesign
in the future." [David,Patrick]
o We added the SEQ.CI value in Feb 2009 with 0 matchpoints. At some
point (once we have some real-life values) we need to evaluate whether
we want to give it points. A good time to do that would be when we
next do fingerprint integration, so we will actually have examples
of .CI in the nmap-os-db. [David]
o [NSE] Make it a warning rather than error if a script in script.db
can't be found. [Patrick]
o Add version detection signature for Ncat chat once we finalize the
announce format. [David]
o Change Nmap signature files to use the .sig extension rather than
.gpg.txt, as that seems to be what gpg recommends. In fact, gpg
will automatically verify the right file if it exists after dropping
the .sig (or .asc) extension. I may need to configure .htaccess to
serve .sig files properly. Update nmap-install.xml
accordingly. Suggested by tic at eternalrealm.net by email on
7/13/08. [Fyodor]
* Rename existing files, add symlink from the old .gpg.txt to .asc
versions
* Add appropriate .htaccess content type if needed for downloads
- not needed since I decided on .asc extension rather than .sig
* Update the generation scripts
* Update the book documentation -
http://nmap.org/book/install.html#inst-integrity
o Ask Coverity if they'll scan latest version of Nmap. [Fyodor asked
David Maxwell on 5/14/09 ]
o Make 4.85BETA9 release [Fyodor]
o [Zenmap] Make a way to start a scan from the profile editor without
creating a profile, then remove the command wizard. This is partial
implementation of
http://www.bamsoftware.com/wiki/Nmap/ZenmapCommandLine. [David]
o [Ncat] Make proxy server mode work on Windows (this is the last
remaining fork() dependency in Ncat).
o Do an OS detection integration run -- last was based on
1/8/09. [David]
o [Ncat] Maybe we should create an SSL cert with no passphrase during
Ncat compilation or install process so that if someone specifies
Ncat -l and --ssl with no --ssl-cert and --ssl-key, we already have
one for them, and it is a slightly better one (since the private key
isn't known) than if we distributed a key. Obviously it is still
subject to MITM attacks since there is no domain validation going
on. But people who need that will have to buy a key from a
certificate authority in any case. We could create the key by using
the "openssl" command line tool as shown in
http://nmap.org/ncat/guide/ncat-advanced.html#ncat-ssl, or maybe
better to have a way for ncat to do it using openssl calls. [David]
o [Zenmap] Should probably give some sort of widget indication that a
scan is running. Now that we can start multiple scans at once, the
"scan" button goes back to being unpressed while the scan is
running. As some scans take minutes or more to show output, it is
not always clear whether they are still properly running. We should
probably have some sort of widget, such as the throbber used in web
browsers, to show that Nmap is still running. It could be fore a
specific scan (kind of like how you have a separate throbber for
each tab on a web browser), or a global one which means at least one
scan is running. Or maybe a different sort of indication is in
order (like a timer). [David]
o Further investigate Nmap Proxy patch by Zoltan Panczel and Ferenc
Spala. See http://nmap-dev.fw.hu/ and
http://seclists.org/nmap-dev/2009/q1/0255.html . [Discussed it and
then added new proxy feature item]
o Wherever practical, fix compiler warnings when compiling Nmap with
VC++ 2008 Express SP1 (there aren't many). [David]
o [NSE] Consider adding boolean expressions to --script arguments. For
example, see Patrick's implementation at
http://seclists.org/nmap-dev/2008/q3/0300.html .
o Generate a list of trusted SSL certificates to ship with Ncat (by
extracting f rom Mozilla or similar), and install them with
Ncat. Decide how these certificat es should be preferred to any
system-provided certs, if any. [David]
o [NSE] Add desired SoC09 infrastructure ideas to this TODO to the
extent they don't already exist.
o [Ncat] Consider supporting server certificate verification when used
in client SSL mode.
o For now we document in user's guide that it is not secure.
o Maybe we can do an ssh-style approach where we just print the
fingerprint and expect the ncat client user to ensure it is the
right one?
o If we're going to verify cert's etc., we need to also make sure we
are actually using secure ciphers. We may need to update nsock to
support cipher selection, because we want fast ones for version
detection, but usually want secure ones for NSE and/or ncat.
o Do we want to check all this by default, or offer an option for
it? Doing it by default is more secure, though it can be annoying
when a certificate has expired, is self-signed, you connect to
domain.com when the certificate is for www.domain.com, etc. If it
is done by deault, we might just print an error message. Whreas
if we have a special option, it may be OK to exit and refuse the
connection.
o What certs should we allow? Same as the browsers do? Maybe get
rid of Comodo? Maybe we should fail to recognize any certs with MD5
in the trust chain?
o What about people who are running their own SSL service and just
want to specify the cert file they use, because they generated it
themself and not from a trusted CA.
o Need to check expiration, domain, etc. if we're checking certs at
all.
o We can probably get away with not doing revocation checking, as
long as we document that we don't.
o consider changing status field from "up" and "down" to "online" and
"offline". Actually, maybe we don't want this after all.
online/offline look pretty similar, and they're longer too. I'm
taking this out of the TODO.
o [Ncat] When acting as an HTTP proxy, we should support GET mode as
well as CONNECT so that it works as a non-SSL proxy in browsers such
as firefox. [David]
o Finalize GSoC applicant research, communication, and selection
[David, Fyodor]
o Go through all the SoC applicants and decide who we want to accept
and start communicating with them. [David,Fyodor]
o Decide which applicants we want, and who would be best for
mentoring them.
o Document that U1.RID gives "G" as long as all the data bytes in the
echoed response data are "C" as expected. This G code is still
given even when the response is truncated, including if there are 0
bytes echoed. [David]
o [Ndiff] Rethink the output format. David says: In particular, I
would like to always have the old state on the left and the new
state on the right: "was filtered, is open," not "is open, was
filtered." I also like the context diff output of MadHat's
nmap-diff. [David]
o Canonicalize the "host up" messages for port scan and ping scan so
that instead of things like "Host scanme.nmap.org (64.13.134.52)
appears to be up ... good." we standardize in both cases on
something like: "Host scanme.nmap.org (64.13.134.52) is up (.75s
latency)". Note the addition of the latency value, which is our
srtt value for the host. This will only show in ping scan and
verbose port scan because the line doesn't appear without verbose
mode. [David]
o Ping scans always seem to say "0 [hosts] undergoing Ping Scan" when
you request stats, rather than the proper number. For an example,
try a command such as "nmap -iR 10000 -sP -n" and then press enter
during the scan. Here are some examples of the bad output: Stats:
25:34:33 elapsed; 991232 hosts completed (72530 up), 0 undergoing
Ping Scan Ping Scan Timing: About 53.69% done; ETC: 22:49 (0:00:09
remaining) Stats: 0:01:10 elapsed; 0 hosts completed (0 up), 0
undergoing Ping Scan Ping Scan Timing: About 24.03% done; ETC: 22:42
(0:03:41 remaining) Stats: 0:03:28 elapsed; 4096 hosts completed
(284 up), 0 undergoing Ping Scan Ping Scan Timing: About 3.06% done;
ETC: 22:44 (0:03:07 remaining) [David]
o Remove obsolete tests from nmap-os-db itself. [David]
o Prepare for Summer of Code
* Brainstorm for ideas
* Create new ideas page
* Apply to participate in program again
* Advertise for applicants
* Evaluate applicants
o NSEDoc script/module documentation pages should probably provide a
link to the script/module source code (except for C modules). The
link format should probably be of the form
http://nmap.org/data/scripts/[script].nse and
/data/nselib/[module].lua. NSEdoc can assume they already exist
there, as we'll probably put them there using the same system we use
to copy other stuff to the data dir.
o [Ncat] Let people set up authenticated proxies using
--listen and --proxy-auth together (right now we don't support
that). [David]
o When you specify multiple comma-separated arguments to --script,
those arguments seem to get lost when the Nmap command is printed in
Nmap's output files. For example, I run the command:
nmap -oN - --script=discovery,intrusive scanme.nmap.org
The output includes:
# Nmap 4.85BETA4 scan initiated Thu Mar 26 15:40:05 2009 as: ./nmap
-oN - --script=discovery scanme.nmap.org
Note the missing ",intrusive" in the script argument. [David]
o Merge patrick/nse-lua-merge for easier-to-maintain and simpler
codebase once David and Patrick are happy with it. [David]
o SVN check out /nmap as an external in a directory named svn or src
or nmapsvn or something under nmap.org web tree. Then redirect the
individual nmap.org/data/ files, where needed, to the nmapsvn
instead. and update nmap-dev Makefile not to copy them to the
/data/ dir anymore. Then update the nsedoc system to generate proper
links to the new script/nselib locations. [Fyodor]
o Improvements to presentation of version detection
information. [Brandon]
o Allow longer strings. Right now it can be 128 chars for the
fullversion info, I think. But that isn't enough for this useful
information-packed string: "Apache httpd 2.0.52 ((Red Hat)
mod_perl/1.99_16 Perl/v5.8.5 DAV/2 mod_jk/1.2.19 PHP/4.3.9
mod_python/3.1.3 Python/2.3.4 mod_ssl/2.0.52 OpenSSL/0.9.7a)".
After discussion w/Brandon, we're going to allow 160 chars total.
o Instead of omitting all information when version info string too
long, we're going to truncate and allow 157 characters, plus
ellipses (...)
o Brandon says: "my final gripe is that the full version string is
constructed as <product><space><version><space>(<extrainfo>).
but, even if product or version are blank, the spaces are still
there"
o I need an output-autoflush option of some sort. This could be
useful to ensure I get all the --packet_trace and debug data before
Nmap crashes. Actually, I'm not sure that is so critical.
o Killing it for now, not sure that it even is needed.
o Fix the directory function(s) in nse_fs.cc to be usable by scripts and
improve flexibility. [this entry added by Patrick]
o [Ncat] The sys_wrap.c/.h code contains a whole bunch of capitalized
versions of system calls (Fork(), Socket(), Sscanf(), etc.) which
are mostly the same as the standard version except that they cause
ncat to quit if they are triggered. They also may be used partially
for portability. The main issues are:
1) Because the function quits in the case of errors, it doesn't
always have the context to print a useful error message (and
even when it does, it often doesn't -- for example Fopen could
print the filename, but doesn't.) Also, sometimes these
functions are called when quitting really isn't the desired
outcome of an error.
2) Some could be replaced by code in nbase, for example, Malloc
basically does the same thing as our safe_malloc already used
throughout Nmap.
So we should probably consider simplifying/removing this code to the
extent possible. But we need to remember to add error detection to
the callers where necessary rather than blindly switching from
(e.g.) Connect() to connect(). [Kris or David]
o With --version-trace (may be a problem with other uses of nsock
tracing too), I often get dozens of "wait_for_events" reports in a
row in a very short period, flooding the logs. For example, with
the command "nmap -sV --version-trace www.google.com", I get:
NSOCK (22.3570s) Callback: WRITE SUCCESS for EID 283 [74.125.19.147:443]
NSOCK (22.3570s) msevent_delete (IOD #4) (EID #283)
NSOCK (22.3570s) wait_for_events
NSOCK (22.3570s) wait_for_events
NSOCK (22.3570s) wait_for_events
NSOCK (22.3570s) wait_for_events
NSOCK (22.3570s) wait_for_events
NSOCK (22.3570s) wait_for_events
NSOCK (22.3570s) wait_for_events
NSOCK (22.3570s) wait_for_events
NSOCK (22.3570s) wait_for_events
[Goes on for pages]
o NSE memory issues (and gh_list assert failure) [David]
o See this thread: http://seclists.org/nmap-dev/2009/q1/0532.html
o We're taking this out for now since the new nse-lua-merge
tenatively looks like it fixes this.
o [Ncat] Why does Ncat require enclosure in a while loop to answer
repeated UDP queries, but not TCP? For example, see the "Emulating
Diagnostic Services" section of the Ncat user's guide.
o Note: http://seclists.org/nmap-dev/2009/q1/0133.html
o Determine what we should do about the IE.DLI OS detection test [David]
o All of the 1656 results for this test in nmap-os-db are DLI=S.
o Is the test not working right (producing the proper results
against targets), or is it just a generally useless test for
which virtually all targets respond the same way?
o Are there other "useless" tests in nmap-os-db? It is worth
checking, IMHO.
o We're going to get rid of IE.DLI, IE.SI, U1.RUL, and maybe TOS and
TOSI tests.
o When you do ncat -h, Ncat should probably show the Nmap version
number rather than (currently) 0.2. Also ncat in -v mode should
show that same header. [David]
o Ncat verbose mode (-v) should probably only give important messages,
such as perhaps a message once you connect successfully to a port,
or a message if the connection attempt times out. An Ncat version
banner (with URL) like Nmap has might be warranted (in verbose
mode). Currently, Ncat floods you with (mostly) useless debugging
information like this with a single -v (this output, on the other
hand, might be useful for a debugging option): [David]
# ncat -C -v scanme.nmap.org 80
NSOCK (0.0000s) TCP connection requested to 64.13.134.52:80 (IOD #1) EID 8
NSOCK (0.0200s) Callback: CONNECT SUCCESS for EID 8 [64.13.134.52:80]
NSOCK (0.0200s) Read request from IOD #1 [64.13.134.52:80] (timeout: -1ms) EID 18
NSOCK (0.0200s) Read request for 0 bytes from IOD #2 (peer unspecified) EID 26
GET / HTTP/1.0
NSOCK (4.4280s) Callback READ SUCCESS for EID 26 (peer unspecified) (15 bytes)
NSOCK (4.4280s) Write request for 16 bytes to IOD #1 EID 35 [64.13.134.52:80]
NSOCK (4.4280s) Callback: WRITE SUCCESS for EID 35 [64.13.134.52:80]
NSOCK (4.4280s) Read request for 0 bytes from IOD #2 (peer unspecified) EID 42
For comparison, here is what Eric Jackson's nc (The nc available in
Fedora 10's package repository) shows in verbose mode for the same
connection:
# nc -v scanme.nmap.org 80
Connection to scanme.nmap.org 80 port [tcp/http] succeeded!
GET / HTTP/1.0 [David]
o Final polishing of our GSoC pages. [Fyodor]
o Advertise widely for Nmap GSoC applicants [Fyodor]
o [Ncat] We should (maybe) consider a way for people to choose
usernames in --chat.
o Removing this for now. We can add it back if we decide we really
want this.
o Deal with new Python 2.6 Zenmap build warnings:
C:\Python26\lib\site-packages\py2exe\build_exe.py:16: DeprecationWarning: the sets module is deprecated
import sets
http://sourceforge.net/tracker/index.php?func=detail&aid=2314799&group_id=15583&atid=115583
[Bug in py2exe, will probably be fixed with a new version of py2exe
once it is released and we upgrade. This isn't causing us any major
problem anyway.]
o When I scan large groups of hosts with OS detection enabled, I get
groups of warnings like:
Insufficient responses for TCP sequencing (0), OS detection may be less accurate
Insufficient responses for TCP sequencing (0), OS detection may be less accurate
Insufficient responses for TCP sequencing (0), OS detection may be less accurate
Insufficient responses for TCP sequencing (0), OS detection may be less accurate
Insufficient responses for TCP sequencing (0), OS detection may be less accurate
Note how it doesn't even tell the relevant IP address, and it isn't
included in an individual host section. We should probably either
include it in the section for an individual host, like we do with
"OSScan results may be unreliable because we could not find at least
1 open and 1 closed port", or (not quite as
good) include the relevant IP address in the error message. And we
may or may not want to require verbose mode.
o Ncat chat should bomine the "already connected" user list into one
line, like:
<announce> already connected: 69.232.238.42 is connected as <user5>, 206.81.65.43 as <user4>, 69.232.238.42 as <user6>
o [Ndiff] Maybe Ndiff should display changes to version detection and
OS detection information? [David]
o Version detection done, now just needs OS detection.
o When I start ncat chat with this tcsh command:
ncat -l --chat scanme.nmap.org < /dev/null >& /dev/null &
The first client to connect to the chat becomes user0 and doesn't
work quite right. Messages user0 type get transmitted to other
clients, but user0 does not see their messages. Nore does user0 get
the normal connection announcement upon connecting. If I quit
user0, the next client to connect becomes user0 again and has the
same problem. If I start ncat on the server with "ncat -l --chat
scanme.nmap.org" (no redirection), other clients can connect with no problems.
o Ncat --chat should probably announce to everyone (including the new
person) when someone connects. This tells the new person their
username, and lets everyone else know about the new connection. [David]
o We should also tell the new person (and possibly everyone on the
channel) the list of existing participants.
o SoC ideas page [Fyodor]
o Nmap 4.85BETA4 release [Fyodor]
o [Ncat] Wouldn't it be nice if we could support --exec (and maybe
some sort of partial-emulated --sh-exec) on Windows? [David]
o Almost working! We found some problems with "ncat.exe -v -l
--sh-exec "ncat -v scanme.nmap.org"
o [Ncat] Can we use it as an IPv4 <-> IPv6 gateway? If so (or if we
can add it), it should be added to the ncat guide feature list.
o Yes, David tried it with --sh-exec and it worked.
o [Ncat] We should probably make it work without OpenSSL. When I try
./configure --without-openssl on latest svn Nmap, Ncat build fails
with:
gcc -MM -I../libpcap -DHAVE_CONFIG_H -D_FORTIFY_SOURCE=2 -I. -I.. -I../nsock/include/ -I../nbase ncat_main.c ncat_connect.c ncat_core.c ncat_listen.c ncat_proxy.c ncat_broker.c ncat_hostmatch.c ncat_ssl.c util.c sys_wrap.c > makefile.dep
make[2]: Leaving directory `/mondo/fyodor/nmap/ncat'
make[2]: Entering directory `/mondo/fyodor/nmap/ncat'
gcc -I../libpcap -DHAVE_CONFIG_H -D_FORTIFY_SOURCE=2 -I. -I.. -I../nsock/include/ -I../nbase -c ncat_main.c -o ncat_main.o
ncat_main.c: In function ‘main’:
ncat_main.c:536: error: ‘struct options’ has no member named ‘ssl’
ncat_main.c: In function ‘ncat_listen_mode’:
ncat_main.c:646: error: ‘struct options’ has no member named ‘ssl’
ncat_main.c:646: error: ‘struct options’ has no member named ‘sslcert’
ncat_main.c:646: error: ‘struct options’ has no member named ‘sslkey’
make[2]: *** [ncat_main.o] Error 1
make[2]: Leaving directory `/mondo/fyodor/nmap/ncat'
make[1]: *** [ncat_build] Error 2
make[1]: Leaving directory `/mondo/fyodor/nmap'
make: *** [static] Error 2
o [Ncat] Defensive coding review of Ncat --chat (talk)
o [Ncat] As SSL server it should not crash when someone connects in
w/o SSL and does ^C. When David tried it during our chat, the ncat
servr "ncat --broker --ssl-key test-key.pem --ssl-cert test-cert.pem
--ssl --chat -l" crashed with: SSL_accept():
error:00000000:lib(0):func(0):reason(0). Also, when a Windows SSL
clients joined and then left, the server died with "Broken pipe
o [Ncat] --chat should probably only allow reasonable chars, to avoid
cntrl-chars, etc.
o Nmap should treat ports named "unknown" in nmap-services the same
way (from a naming perspective) as it treats ports which are not
listed at all. See http://seclists.org/nmap-dev/2009/q1/0589.html.
o Ncat user guide "Emulating Diagnostic Services" page has a very long
UDP chargen server line which causes wrapping problems in web browsers
(e.g. it widens the page substantially). It should probably be
split into multiple lines. [David]
o Ncat user guide proxying section says "The only exception is when
listing a proxy host by IPv6 address; then the port is required."
Why would we require a port number for IPv6 rather than just use the
same defaults as we do for IPv4?
[David explained that this is because to do otherwise would be
ambiguous because IPv6 uses : for separaters, so we wouldn't know
how to handle things like FF::10:80]
o [Ncat] Perhaps we should make --ssl work in --chat. If nothing
else, it might be useful if you want to reduce the number of people
connecting with telnet, etc. rather than ncat.
o [Ncat] --talk should probably be changed (in the code and
documentation) to --chat, as Ncat chat has a
much nicer ring to it, IMHO. --talk should remain as an alias to
--chat, but we don't need to document it. [David]
o Ncat Windows issue where you make a connection and then take several
seconds to type in a line to the server, Ncat wrongly times out when
trying to write your line to the remote server. [David]
o Ncat write timeout problems cause client to quit due to write
timeout sometimes. [David]
Examples:
o yes | ncat localhost
o when we paste a few lines into the terminal window in an Ncat chat
o Defensive coding review of ncat_proxy.* [David]
o Process the latest version detection submissions. We now have more
than 1,700 of them queued up. [Doug]
o Write Ncat users' guide, demonstrating all the neat stuff you can do
with it. This should probably be in DocBook XML so it can be an NNS
chapter. You might want to query nmap-dev for list of neat things
people do with ncat (or look around for what people do with nc).
Testing it out for examples might expose areas for improvement as
well. [David]
o Look at Dario Ciccarone's email from 5/1/07 about IPID sequence
issues, and consider adding IPID sequence test for closed-port-tcp as
they apparently can be different. [David]
o Also fix bug which causes SEQ to not be printed if the TCP open
port tests fail to produce results, even though the II and
(upcoming) CI tests may have useful results. [David]
o NSE should offer some way to sleep/yield for a given amount of
time. This would allow other scripts to run while a script has
nothing to do. Possible uses:
o Many services have rate limits (or you might just want to use them
for politeness). For example, a web site spidering application
might want to limit HTTP requests to some number per second to avoid
pissing off the target webmaster more than is necessary (or prevent
getting auto-blocked). Similarly, whois servers often will block
IPs which query them too often in a short period. Or maybe you
don't want to exceed the threshold limits of an IDS.
o Example current scripts which might benefit: sql-injection, whois
(possibly), pop3-brute, etc.
o If we don't currently have a way for a cpu-bound NSE script to
yield, then perhaps this could help us implement such a mechanism.
But maybe coroutine.yield already does the trick.
o The mechanism needs to be documented, and ideally should be
implemented in at least one of the scripts shipped with Nmap.
o Consider adding a way for requesting timing status updates at a
given interval (such as every 5 seconds) to XML and/or normal
output. This would be useful for people who run Nmap from scripts
or other higher level applications. [David]
o Ncat --allow/--deny bug: "--allow and --deny only support host
specification by IP address, and give no warning when you use
another form such as a host name." Should probably use same syntax
as --exclude. We also want to at least do verification at the
beginning to make sure all the entries are legitimately formed. We
probably want to do things like DNS resolution at the beginning
too. Otherwise we might have a DNS failure when we actually get a
connection and perhaps have to reject the connection wrongly, or
risk a false negative. [David]
o Fix this overflow:
Stats: 93:57:40 elapsed; 254868 hosts completed (2048 up), 2048 undergoing UDP Scan
UDP Scan Timing: About 11.34% done; ETC: 03:21 (-688:-41:-48 remaining)
[Done by David and Henri Doreau]
o Ncat -- perhaps connection brokering should support UDP as well as
(its existing support for) TCP? Actually this does raise issues
such as deciding what list of UDP systems to forward a packet too.
Its obviously not like TCP where you have a list of open
connections. Ncat could build such a list, but, for example, would
never know when to remove the host. For now, David is just going to
adjust the error message to encourage people to email nmap-dev
describing their usage scenario if they want this feature.
o Ncat documentation should note that no SSL certificate verification
is done (maybe we should offer an option to do so, if OpenSSL makes
that easy).
o Done in the new Ncat user's guide
o Fix dns-zone-transfer infinite recursion bug described at
http://seclists.org/nmap-dev/2009/q1/0317.html. It sounds like the
best approach is to use our dns.lua library rather than having
dns-zone-transfer do its own DNS packet parsing.
o Fix XML escaping issue so that improper chars from NSE scripts or
elsewhere can't cause corrupt XML files. See
http://seclists.org/nmap-dev/2009/q1/0316.html for an example. [David]
o Look into whether we should increase the frequency of port scan
pings. See http://seclists.org/nmap-dev/2008/q1/0096.html . Note
that Fyodor already increased them a bit in 2008. Might not need
more. [David did extensive testing of this one already]
o Find way to document NSE library script arguments and perhaps have
them bubble up to scripts themselves. For example, I had to read
the SNMP library source code to determine the script argument to
specify the SNMP community name for snmp-sysdescr
(http://nmap.org/nsedoc/scripts/snmp-sysdescr.html). Maybe we could
just standardize on something like we do with SMB library and the
scripts which call it (http://nmap.org/nsedoc/modules/smb.html,
http://nmap.org/nsedoc/scripts/smb-check-vulns.html). [David]
o If it wouldn't bloat things too much, it would be nice to include
ndiff in the Nmap win32 zip distribution files.
o Reported NSE crash:
"Assertion failed - file ..\nse_main.cc line 314
lua_gettop(L_script_scan) == 0"
o He says: "After looking at this closer, it appears the assertion
occurs if I include the IP where the scan is run from. For us, I'm
running this on IP 57, which is a VMware Windows Server image. If
I eliminate that IP from the range it successfully completed the
scan for all other devices."
o Seems to be fixed. He can no longer reproduce the problem with
4.85BETA3.
o Deal with GTK DLL problem with Nmap 4.85BETA1: [Fyodor]
o David's installer seems to work--he's using a different GTK
distribution. I'll try that. Works! Done!
o Details on problem: http://seclists.org/nmap-dev/2009/q1/0207.html
o Quick workaround done for 4.85BETA2, but better solution needed.
o "SCRIPT ENGINE (250.600s): ./scripts/rpcinfo.nse against
a.b.c.d:<port> ended with error: ./nselib/datafiles.lua:114: attempt
to index global 'arg' (a nil value)"
-- http://seclists.org/nmap-dev/2009/q1/0227.html [Patrick]
o Consider making the TODO list public
o Done: http://seclists.org/nmap-dev/2009/q1/0175.html
o Probably remove all of the "done" items since that is easier than
reviewing them.
o Might as well add to insecure.org/nmap/data/
o Maybe a bug tracker is a better approach.
Reference in New Issue View Git Blame Copy Permalink