mirror of
https://github.com/nmap/nmap.git
synced 2025-12-09 22:21:29 +00:00
ed2ba4e168
If you have trouble updating after this revision you need to follow these instructions. You have probably just seen an error like this: svn: URL 'svn://svn.insecure.org/nping' of existing directory 'nping' does not match expected URL 'svn://svn.insecure.org/nmap/nping' This is caused by the replacement of SVN externals. Here's what you need to do. First, save any local changes you might have in the nping, nsock, nbase, ncat, and zenmap directories. (For example by running "cd nping; svn diff > ../nping.diff".) If you don't have any local changes you can skip this step. Then run these commands: rm -rf nping/ nsock/ nbase/ ncat/ zenmap/ svn update svn cleanup If all else fails, you can just delete your whole working directory and check out anew: svn co --username guest --password "" svn://svn.insecure.org/nmap There may be further discussion in the mailing list thread at http://seclists.org/nmap-dev/2011/q4/303.
120 lines
6.6 KiB
Plaintext
120 lines
6.6 KiB
Plaintext
Nping 0.5.59BETA1 ( http://nmap.org/nping )
|
|
Usage: nping [Probe mode] [Options] {target specification}
|
|
|
|
TARGET SPECIFICATION:
|
|
Targets may be specified as hostnames, IP addresses, networks, etc.
|
|
Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254
|
|
PROBE MODES:
|
|
--tcp-connect : Unprivileged TCP connect probe mode.
|
|
--tcp : TCP probe mode.
|
|
--udp : UDP probe mode.
|
|
--icmp : ICMP probe mode.
|
|
--arp : ARP/RARP probe mode.
|
|
--tr, --traceroute : Traceroute mode (can only be used with
|
|
TCP/UDP/ICMP modes).
|
|
TCP CONNECT MODE:
|
|
-p, --dest-port <port spec> : Set destination port(s).
|
|
-g, --source-port <portnumber> : Try to use a custom source port.
|
|
TCP PROBE MODE:
|
|
-g, --source-port <portnumber> : Set source port.
|
|
-p, --dest-port <port spec> : Set destination port(s).
|
|
--seq <seqnumber> : Set sequence number.
|
|
--flags <flag list> : Set TCP flags (ACK,PSH,RST,SYN,FIN...)
|
|
--ack <acknumber> : Set ACK number.
|
|
--win <size> : Set window size.
|
|
--badsum : Use a random invalid checksum.
|
|
UDP PROBE MODE:
|
|
-g, --source-port <portnumber> : Set source port.
|
|
-p, --dest-port <port spec> : Set destination port(s).
|
|
--badsum : Use a random invalid checksum.
|
|
ICMP PROBE MODE:
|
|
--icmp-type <type> : ICMP type.
|
|
--icmp-code <code> : ICMP code.
|
|
--icmp-id <id> : Set identifier.
|
|
--icmp-seq <n> : Set sequence number.
|
|
--icmp-redirect-addr <addr> : Set redirect address.
|
|
--icmp-param-pointer <pnt> : Set parameter problem pointer.
|
|
--icmp-advert-lifetime <time> : Set router advertisement lifetime.
|
|
--icmp-advert-entry <IP,pref> : Add router advertisement entry.
|
|
--icmp-orig-time <timestamp> : Set originate timestamp.
|
|
--icmp-recv-time <timestamp> : Set receive timestamp.
|
|
--icmp-trans-time <timestamp> : Set transmit timestamp.
|
|
ARP/RARP PROBE MODE:
|
|
--arp-type <type> : Type: ARP, ARP-reply, RARP, RARP-reply.
|
|
--arp-sender-mac <mac> : Set sender MAC address.
|
|
--arp-sender-ip <addr> : Set sender IP address.
|
|
--arp-target-mac <mac> : Set target MAC address.
|
|
--arp-target-ip <addr> : Set target IP address.
|
|
IPv4 OPTIONS:
|
|
-S, --source-ip : Set source IP address.
|
|
--dest-ip <addr> : Set destination IP address (used as an
|
|
alternative to {target specification} ).
|
|
--tos <tos> : Set type of service field (8bits).
|
|
--id <id> : Set identification field (16 bits).
|
|
--df : Set Don't Fragment flag.
|
|
--mf : Set More Fragments flag.
|
|
--ttl <hops> : Set time to live [0-255].
|
|
--badsum-ip : Use a random invalid checksum.
|
|
--ip-options <S|R [route]|L [route]|T|U ...> : Set IP options
|
|
--ip-options <hex string> : Set IP options
|
|
--mtu <size> : Set MTU. Packets get fragmented if MTU is
|
|
small enough.
|
|
IPv6 OPTIONS:
|
|
-6, --IPv6 : Use IP version 6.
|
|
--dest-ip : Set destination IP address (used as an
|
|
alternative to {target specification}).
|
|
--hop-limit : Set hop limit (same as IPv4 TTL).
|
|
--traffic-class <class> : : Set traffic class.
|
|
--flow <label> : Set flow label.
|
|
ETHERNET OPTIONS:
|
|
--dest-mac <mac> : Set destination mac address. (Disables
|
|
ARP resolution)
|
|
--source-mac <mac> : Set source MAC address.
|
|
--ether-type <type> : Set EtherType value.
|
|
PAYLOAD OPTIONS:
|
|
--data <hex string> : Include a custom payload.
|
|
--data-string <text> : Include a custom ASCII text.
|
|
--data-length <len> : Include len random bytes as payload.
|
|
ECHO CLIENT/SERVER:
|
|
--echo-client <passphrase> : Run Nping in client mode.
|
|
--echo-server <passphrase> : Run Nping in server mode.
|
|
--echo-port <port> : Use custom <port> to listen or connect.
|
|
--no-crypto : Disable encryption and authentication.
|
|
--once : Stop the server after one connection.
|
|
--safe-payloads : Erase application data in echoed packets.
|
|
TIMING AND PERFORMANCE:
|
|
Options which take <time> are in seconds, or append 'ms' (milliseconds),
|
|
's' (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m, 0.25h).
|
|
--delay <time> : Adjust delay between probes.
|
|
--rate <rate> : Send num packets per second.
|
|
MISC:
|
|
-h, --help : Display help information.
|
|
-V, --version : Display current version number.
|
|
-c, --count <n> : Stop after <n> rounds.
|
|
-e, --interface <name> : Use supplied network interface.
|
|
-H, --hide-sent : Do not display sent packets.
|
|
-N, --no-capture : Do not try to capture replies.
|
|
--privileged : Assume user is fully privileged.
|
|
--unprivileged : Assume user lacks raw socket privileges.
|
|
--send-eth : Send packets at the raw ethernet layer.
|
|
--send-ip : Send packets using raw IP sockets.
|
|
--bpf-filter <filter spec> : Specify custom BPF filter.
|
|
OUTPUT:
|
|
-v : Increment verbosity level by one.
|
|
-v[level] : Set verbosity level. E.g: -v4
|
|
-d : Increment debugging level by one.
|
|
-d[level] : Set debugging level. E.g: -d3
|
|
-q : Decrease verbosity level by one.
|
|
-q[N] : Decrease verbosity level N times
|
|
--quiet : Set verbosity and debug level to minimum.
|
|
--debug : Set verbosity and debug to the max level.
|
|
EXAMPLES:
|
|
nping scanme.nmap.org
|
|
nping --tcp -p 80 --flags rst --ttl 2 192.168.1.1
|
|
nping --icmp --icmp-type time --delay 500ms 192.168.254.254
|
|
nping --echo-server "public" -e wlan0 -vvv
|
|
nping --echo-client "public" echo.nmap.org --tcp -p1-1024 --flags ack
|
|
|
|
SEE THE MAN PAGE FOR MANY MORE OPTIONS, DESCRIPTIONS, AND EXAMPLES
|
|
|